Today is about Calibration

I tried to do some prints today but our calibration is off. The prints I have done thus far are pretty hollow. So we went through David Durant's calibration tutorial. Here are the results from our test calibrations.

Text 1

Extrusion Width over thickness: 1.7

Feedrate (mm/s): 34.1

Test 2

Extrusion Width over thickness: 1.7

Feedrate (mm/s): 33

Test 2

Extrusion Width over thickness: 1.7

Feedrate (mm/s): 33.25

Carve: .4

We decided to stick with a feedrate of 33.25 because that gave us the best results on the test prints.